SSH 인증 구조를 설정하려고 하는데 /etc/ssh/sshd_config 대 /etc/pam.d/sshd의 문제로 어려움을 겪고 있습니다.

요구 사항:

  1. root/sudo 권한이 있는 계정
    • 공개 키 인증을 요구하고 즉시
    • 구글 인증기
  2. 권한이 없는 계정
    • 공개 키 인증만 필요

즉, 비밀번호 기반 인증은 허용하지 않으며 공개키 인증은 항상 필요하며 Google Authenticator는 조건부로 필요합니다.

작동하는 것:

권한 있는 계정은 내가 필요로 하는 대로 정확히 작동합니다. 공개 키 다음에 Google Authenticator가 옵니다. 또한 ~/.ssh/authorized_keys에서 누락된 공개 키가 거부되는 것을 확인하고 키를 제공하지 않은 로그인 시도가 거부되는 것을 확인했습니다.

작동하지 않는 것:

권한이 없는 계정은 개인 키의 잠금을 해제하기 위해 비밀번호를 올바르게 입력하라는 메시지를 표시하고 키가 성공한 것 같습니다. 그러나 다음 메시지와 함께 인증이 실패합니다.

Permission denied (keyboard-interactive).

 

$ ssh -v -i id_rsa_unprivileged [email protected]
debug1: Server accepts key: pkalg ssh-rsa blen 2071
Enter passphrase for key 'id_rsa_unprvileged': 
Authenticated with partial success.
debug1: Authentications that can continue: keyboard-interactive
debug1: Next authentication method: keyboard-interactive
debug1: Authentications that can continue: keyboard-interactive
debug1: No more authentication methods to try.
[email protected]: Permission denied (keyboard-interactive).

 

$ sudo cat /var/log/auth.log
Sep  3 00:44:13 hostname sshd[4249]: pam_succeed_if(sshd:auth): requirement "user ingroup 2faexempt" was met by user "unprivileged"
Sep  3 00:44:13 hostname sshd[4247]: error: PAM: Permission denied for unprivileged from IP ADDRESS
Sep  3 00:44:13 hostname sshd[4247]: Connection closed by IP ADDRESS port PORT [preauth]

참고: 권한이 없는 계정은 ~/.ssh/authorized_keys에서 누락된 공개 키를 올바르게 거부하고 키를 제공하지 않는 로그인 시도를 거부합니다.

제가 한:

전략 은 "2faexempt"라는 그룹을 만들고 2단계 인증에서 면제되어야 하는 계정(권한 없는 계정)을 추가하는 것이었습니다. 그런 다음 필요한 정책을 반영하도록 /etc/ssh/sshd 및 /etc/pam.d/sshd를 편집했습니다.

$ cat /etc/ssh/sshd_config
#   $OpenBSD: sshd_config,v 1.100 2016/08/15 12:32:04 naddy Exp $

# This is the sshd server system-wide configuration file.  See
# sshd_config(5) for more information.

# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented.  Uncommented options override the
# default value.

Port 22
AddressFamily inet
#ListenAddress 0.0.0.0
#ListenAddress ::

#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
#HostKey /etc/ssh/ssh_host_ed25519_key

# Ciphers and keying
#RekeyLimit default none

# Logging
#SyslogFacility AUTH
#LogLevel INFO

# Authentication:

#LoginGraceTime 2m
PermitRootLogin no
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10

PubkeyAuthentication yes

# Expect .ssh/authorized_keys2 to be disregarded by default in future.
AuthorizedKeysFile  .ssh/authorized_keys

#AuthorizedPrincipalsFile none

#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody

# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes

# To disable tunneled clear text passwords, change to no here!
PasswordAuthentication no
#PermitEmptyPasswords no

# Change to yes to enable challenge-response passwords (beware issues with
# some PAM modules and threads)
ChallengeResponseAuthentication yes

# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no

# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
#GSSAPIStrictAcceptorCheck yes
#GSSAPIKeyExchange no

# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication.  Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
UsePAM yes

# USER ADDED
#
AuthenticationMethods publickey,keyboard-interactive

#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
#PermitTTY yes
PrintMotd no
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#UsePrivilegeSeparation sandbox
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS no
#PidFile /var/run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none

# no default banner path
#Banner none

# Allow client to pass locale environment variables
AcceptEnv LANG LC_*

# override default of no subsystems
Subsystem   sftp    /usr/lib/openssh/sftp-server

# Example of overriding settings on a per-user basis
#Match User anoncvs
#   X11Forwarding no
#   AllowTcpForwarding no
#   PermitTTY no
#   ForceCommand cvs server

 

$ cat /etc/pam.d/sshd
# PAM configuration for the Secure Shell service

# USER COMMENTED
# 
## Standard Un*x authentication.
#@include common-auth

# Disallow non-root logins when /etc/nologin exists.
account    required     pam_nologin.so

# Uncomment and edit /etc/security/access.conf if you need to set complex
# access limits that are hard to express in sshd_config.
# account  required     pam_access.so

# Standard Un*x authorization.
@include common-account

# SELinux needs to be the first session rule.  This ensures that any
# lingering context has been cleared.  Without this it is possible that a
# module could execute code in the wrong domain.
session [success=ok ignore=ignore module_unknown=ignore default=bad]        pam_selinux.so close

# Set the loginuid process attribute.
session    required     pam_loginuid.so

# Create a new session keyring.
session    optional     pam_keyinit.so force revoke

# Standard Un*x session setup and teardown.
@include common-session

# Print the message of the day upon successful login.
# This includes a dynamically generated part from /run/motd.dynamic
# and a static (admin-editable) part from /etc/motd.
session    optional     pam_motd.so  motd=/run/motd.dynamic
session    optional     pam_motd.so noupdate

# Print the status of the user's mailbox upon successful login.
session    optional     pam_mail.so standard noenv # [1]

# Set up user limits from /etc/security/limits.conf.
session    required     pam_limits.so

# Read environment variables from /etc/environment and
# /etc/security/pam_env.conf.
session    required     pam_env.so # [1]
# In Debian 4.0 (etch), locale-related environment variables were moved to
# /etc/default/locale, so read that as well.
session    required     pam_env.so user_readenv=1 envfile=/etc/default/locale

# SELinux needs to intervene at login time to ensure that the process starts
# in the proper default security context.  Only sessions which are intended
# to run in the user's context should be run after this.
session [success=ok ignore=ignore module_unknown=ignore default=bad]        pam_selinux.so open

# Standard Un*x password updating.
@include common-password

# USER ADDED
#
auth [success=1 default=ignore] pam_succeed_if.so user ingroup 2faexempt
auth sufficient pam_google_authenticator.so
answer

나는 그것을 작동시키는 방법을 생각했다. 그것은 매우 해킹 된 것처럼 보이지만 작동합니다.

그것은 나에게 안전하지 않은 것 같습니다.

$ cat relevant section of /etc/pam.d/sshd
...
# USER COMMENTED
# 
## Standard Un*x authentication.
#@include common-auth
...
# USER ADDED
#
auth [success=1 default=ignore] pam_succeed_if.so user ingroup 2faexempt
auth requisite pam_google_authenticator.so
auth required pam_permit.so